收藏本站联系我们 您好,欢迎来到济南空调维修,济南空调安装,三联家电售后服务中心!

新闻中心
当前位置:首页-新闻中心 >

空调怎样加氟合适

来源:http://www.jnslshwx.com 日期:2017-07-03 发布人:admin
1、开启空调
1. Turn on the air conditioner
夏天加氟时可直接让空调在制冷模式下运转。因为制热状态下无法进行加氟操作,所以冬天加氟时,要用制热拔换向阀线的方法,强制空调进入制冷状态。
When the fluorine is added in summer, the air conditioner can be directly operated in the refrigeration mode. Because of the heating system can not add fluorine operation, so in winter, when adding fluorine, you should use the method of making the valve line, forcing air conditioning into the refrigeration.
2、连接加氟设备
2. Connect the fluoride equipment
空调正常启动后,从室外机低压阀侧的工艺口连接加氟设备。此过程中一定要排掉加氟管中的空气和脏物。
After the normal starting of the air conditioner, the fluorine adding equipment is connected from the process port of the low pressure valve of the outdoor machine. In this procedure, air and dirt in the fluoride pipe must be removed.
3、测压加氟
3 、 pressure plus fluorine
夏天观察低压压力,环境温度32摄氏度左右时,压力控制在0.45MP左右;
Low pressure observation in summer, the ambient temperature of about 32 degrees Celsius, the pressure control at around 0.45MP;
冬天观察制热时的高压压力,压力稳定后控制在1.7MP左右。
In winter, high pressure is observed during heating, and the pressure is stabilized at about 1.7MP.
4、撤掉加氟设备
4, removal of fluoride equipment
在制泠状态下去掉加氟设备,拧紧外机密封纳子;制热状态下去掉设备的话,会造成大量的氟立昂泄漏。
In refrigeration state remove fluoride nano devices, tighten the machine seal; if remove the equipment under the heating state, will cause a lot of freon leak.
5、加氟完毕
5. Complete with fluoride
对怀疑有泄漏点的空调,要用洗涤精泡沫进行检查。
For suspected leakage of air conditioning, the use of detergent bubble examination.
我公司的产品质量可靠,价格优惠,质量过硬,经久耐用,长期受到广大客户的好评与赞誉,是客户选择同类产品的。
My company's products of reliable quality, price concessions, quality, durable, long-term acclaim by the majority of customers and praise, is the choice of similar products customers choice.

上一篇:济南空调维修之空调不制热的原因
下一篇:济南空调安装之前需要做什么